Repeat Max Brushed Planetary 24mm Gearmotor
£36.50
A great power and toughness upgrade from our 22mm brushed motors, Repeat’s Max Brushed has a tough gearbox & shaft combined with a high power brushed motor which is well suited with our brushed single or dual brushed ESCs! 24mm planetary gearbox, 6mm hardened steel shaft – extra length for bearing support or use rotary tool to cut off excess to save weight. Mount with Mega Spark Face Mounts and M2x5mm countersunk bolts. We stock 6mm eco hubs and 6mm screw hubs for easy wheel attaching! Geared for speed and power, we recommend running smaller wheel sizes or an extra reduction stage, particularly at higher voltages. CAD: STEP file. Motor drawing, wiring diagram, motor tips & battle hardening info below.
8 in stock
Related Products:
-
Repeat Gold Screw Hub
£5.00 Select options -
Flysky 4 Channel Receiver
£11.00-£11.50 Select options -
BBB Beetleweight Single Brushed ESC v3
£16.50 Add to basket -
BBB Beetleweight Dual Brushed ESC
£33.00 Add to basket -
Flysky FS-i6 Transmitter
£48.00 Add to basket -
Pair of Repeat Gold Eco Hubs for Foam Wheels
£16.50 Select options -
3 Pairs of 3.5mm Bullet Connectors
£1.00 Add to basket -
Repeat AM32 Brushless Drive ESC
£28.50 Add to basket -
12V LED Safety Power Strip
£2.00 Add to basket
Motor Drawing:
Beetle Wiring Diagram using these motors:
Components in this example: 3S or 4S Lipo, Beetle Safety Kit, Breakout cable, BBB ESCs, Repeat Max Brushed, BEC and Flysky Reciever.
Image made by Team DSC.
Brushed motor tips:
If you find the motors stuttering when driving them, running them in for a while and a 0.1 uf capacitor across the motor leads can help. We have tips on our single brushed ESC page for handling the added noise of high powered brushed motors.
Battle Hardening:
From FingerTech:
As with every gearmotor, it is best practice to remove all the screws and reassemble using loctite. A small dab on each screw will be enough to keep them from vibrating loose.
– Since the gearboxes are packed with grease, it will need to be cleaned off of the eight small Phillips screws before applying the loctite.
– Even better than loctite is a product called Vibra-Tite VC-3. Apply it to the screw threads, wait 30min, and it will harden to a plastic-like coating. Since it hardens before touching the greasy gearbox threads, it can do a better job of holding the screws in place.
Reviews
There are no reviews yet.