XT30 Safety Kit
From £3.00
A great kit to add all the essential safety features to your beetle – link, fuse and power light. Includes:
- A XT30 connector with built in mount (2mm holes, 20.4mm apart) for easy mounting into your beetle’s chassis as the link connector – see store page for dimensions and CAD.
- A pair of XT30 connectors – one to use as the removable link
- Heat Shrink for the connector ends
- 30A fuse wire to easily add a fuse as part of your removable link – just solder it across the XT30 terminals.
- 12V white LED or LED strip for use as a power light.
Wiring diagrams below.
Qty:-+
Select LED:
Select Fuse Size:
Add wiring loom:
Related Products:
-
Beetleweight Brushless Drive Kit
From £162.00 Select options -
Playable Battle Robot Kits
£46.00 Select options -
Repeat Dual AM32 Brushless Drive ESC
£52.00 Add to basket -
Repeat Compact Brushless Planetary 22mm Gearmotor
£46.50 Add to basket -
XT60 Safety Kit
From £3.00 Select options -
Featherweight Drive Kit
From £137.00 Select options -
Antweight Spinner Electronics
From £26.50 Select options -
Beetleweight Drive Kit
From £90.00 Select options -
BBB Beetleweight AM32 Brushless Drive ESC
£14.50 Add to basket -
Antweight Drive Kit
From £24.00 Select options
Example Robot: Sproing! by Will Pargeter
Sproing! is Will’s spring powered flipper bot. It runs two servos to wind the springs up to release as a flipper! He uses the full BBB drive kit including all the safety components – LED, fuse wire link and micro BEC.
Safety kit example circuits:
Typical Beetle Wiring Diagram using the safety kit:
Components in this example: 3S or 4S Lipo, Beetle Safety Kit, Breakout cable, BBB ESCs, BBB 22mm Motors, BEC and Flysky Reciever.
Image made by Team DSC.
Jed (verified owner) –
This little kit gets you half way through passing tech checks immediately! Now I just need to worry about fitting in the weight limit 🙂