XT30 with built in mount

(2 customer reviews)


Female XT30 with built in bracket holes. Holes are 2mm in diameter, 20.4mm apart. Great for mounting to beetle robots as a mounted connector for a male XT30 removable link. Technical name is XT30G-F. CAD files: step, SLDPRT. Example robot below.

48 in stock

Category: Tags: , ,

Example Robot: Bop! by Craig Croucher

Craig built this adorable four wheel drive hammer robot called Bop! – He uses an XT30 with built in mount for his link dock – he’s bolted this to the base of the robot and added a polycarbonate link door to prevent the link getting knocked out – a great tip! Check out his build diary on the forum.

Connector Drawing:

Typical Beetle Wiring Diagram using mountable XT30 for link dock:

Components in this example: 3S or 4S Lipo, Beetle Safety Kit, Breakout cable, BBB ESCsBBB 22mm MotorsBEC and Flysky Reciever.
Image made by Team DSC.

2 reviews for XT30 with built in mount

  1. Stuart (verified owner)

    Love this product. I made a little holder from heat bent polycarb and mounted 25mm down, on the inside wall of the back plate so only the zip tie on the link stuck out above the top plate.

  2. Robert K (verified owner)

    Massively simplifies design link mounts for Beetleweight robots. Securely holds the XT30M and isn’t much harder than a normal XT30 to solder the wires to. The mounting holes were Ø2.0mm but were easily drilled out to Ø2.5mm and there is space for the screw heads to fit.
    100% recommended for Beetleweight links.

Add a review

Your email address will not be published. Required fields are marked *