2S HV Metal Geared Antweight Servo
£12.50
New: High Speed Servo – get double the speed and torque!
A great servo for adding a weapon to an antweight such as a lifter, grabber or flipper. Full metal gears, decent speed and supports 2S lipo voltage so can be ran without a BEC – many servos can only run up to 6V. Rotates approximately 120 degrees when using a servo extender or Malenki‘s servo stretcher mode (see manual) Comes with 3 different shaped horns and a screw to mount to the spline. CAD: STEP, f3d, stl (thanks Tom) Example robot & wiring diagrams below.
20 in stock
Related Products:
-
A5 Polycarbonate Sheets
£2.00-£2.50 Select options -
BBBxN&B Antweight N10 Gearmotors
£11.00 Select options -
Flysky 4 Channel Receiver
£11.00-£11.50 Select options -
Servo Extender
£4.00 Add to basket -
MR30 Male Female Pair & Sleeves
£1.00 Add to basket -
BBB Edition Antweight Dual ESC v3
£12.50 Add to basket -
2S HV High Speed Metal Geared Antweight Servo
£22.50 Add to basket -
XT30 Male Female Pair & Heat Shrink
£1.00 Add to basket
Example Robot: Spirit of Razer by Michael Clements
Spirit of Razer is Michael’s grabber antweight inspired by Razer from Robot Wars! He uses the servo to power the grabbing arm and runs a Malenki-Nano with N10s for drive.
Wiring with a BBB Dual ESC:
Wiring with a Malenki-Nano:
Daniel (verified owner) –
The perfect servo for antweights!
Designed for 2s lipo and equipped with tough gears.
Rhys (verified owner) –
Much more power than sg&mg90s. Exactly what I needed.
Martin (verified owner) –
Exactly what i was looking for. I was using a Futaba plastic micro servo which was not designed for 2S Lipos, managed to break one and the second probably wasn’t far off.
As these are rated for the 2S lipo voltage, there is no worries about it breaking in normal use. It is 5g heavier (coming in at 13g) and a couple of mm larger than the plastic servo i was using, but it is well worth it. It is quick and strong so will be good for flippers, i look forward to giving it a proper go soon.