Pair of 24mm Repeat Max v2 Face Mounts
£4.00
A pair of custom laser cut 3mm Nylon 6 mounts. Designed for face mounting repeat max v2 motors. These fit tightly to the front face of the motor.
Includes eight M3 8mm screws for mounting the motors to the faceplate. We recommend attaching the face mount to HDPE with a 24mm hole for the gearbox to sit on. The faceplate can attach to the HDPE with the four 3mm holes spaced 22mm apart.
Please note due to nature of laser cutting, there will be some imperfections in the mount. Mount drawing and mounting instructions below. CAD: step file.
6 in stock
Related Products:
-
Pair of 22mm BBB Beetleweight Motor Face Mounts v2
£3.50 Add to basket -
BBB Brushed ESC Programmer
£4.00 Add to basket -
Pair of FingerTech Mega Spark Face Mounts
£5.50 Add to basket -
Beetleweight Brushless Drive Kit
From £165.00 Select options -
Repeat Gold Screw Hub
£5.00 Select options -
Beetleweight Brushed Drive Kit
From £90.00 Select options -
Repeat Max v2 Brushless Planetary 24mm Gearmotor
£55.00 Add to basket -
BETA RUN: BBB Beetleweight Single Brushed ESC v4
£16.50 Select options This product has multiple variants. The options may be chosen on the product page -
Pair of Repeat Gold Eco Hubs v2 for Foam Wheels
£16.50 Select options
Faceplate Drawing:
Mounting instructions:
Similar to the BBB 22mm mounts (pictured below), we recommend using blue thread locker to attach the M3 screws to the motor. Clean the screws and re-apply each time you use and allow 24hrs for it to set.
Use a 24mm forstner bit to cut a 24mm hole in 10mm HDPE or similar for the 24mm motor to sit in. Attach faceplate to the outside of the wall with M3 bolts or woodscrews. 22mm mounts pictured below as an example mounting from Igor by Jon-Luke.
Reviews
There are no reviews yet.