Servo Extender
£4.00
Frustrated with your “180 degree servo” only rotating half as much? This is due to RC gear not sending a wide enough PWM signal. This nifty little servo extender only weighs 2.5g and plugs in-between your receiver and servo to double the PWM output range to the servo! (1000us to 2000us) – great for helping with servo applications in ants and beetles with a larger range such as self righting, lifting and flipping. It runs at up to 16V suiting higher voltage 12V beetle servos as well as our high voltage ant servo offering.
Note: When first plugging in, we recommend initially slowly rotating the servo – some can hit an internal limit plate before reaching their full range – in that case limit the output range on your transmitter to prevent this from happening. Plugged in like so:
Also called: Servo Stretchers, Servo Expanders
23 in stock
Related Products:
-
MR30 Male Female Pair & Sleeves
£1.00 Add to basket -
BBBxN&B Antweight N10 Gearmotors
£11.00 Select options -
BBB Edition Antweight Dual ESC v3
£12.50 Add to basket -
Antweight N10/N20 Red ESC
£8.50 Add to basket -
XT30 Male Female Pair & Heat Shrink
£1.00 Add to basket -
Flysky 4 Channel Receiver
£11.00-£11.50 Select options -
2S HV High Speed Metal Geared Antweight Servo
£22.50 Add to basket -
A5 Polycarbonate Sheets
£2.00-£2.50 Select options
RayBlueSky (verified owner) –
Arrived in 24 hrs, so pleased as its used to control a servo that opens a window for the kiddy Cats to go into their Catio Area. Its a plug and play so no setting up required as all i wanted was 180 degrees of servo travel when a sensor detected movement. Many thanks for a quick delivery
Regards R.