BBB Beetleweight Planetary 22mm Gearmotor v2

(9 customer reviews)

£16.50

BBB Beetleweight Planetary 22mm 16:1 Gear Motor well suited for beetleweight robots.

  • Custom manufactured to our specifications
  • All metal geared planetary gearbox with grease
  • All screws set with thread locker
  • Hardened stainless steel 420 grade shaft
  • 19g lighter than standard 25mm beetle motors.
  • More robust gearboxes than standard 25mm beetle motors
  • Similar spec to 22mm motors seen in american robot kits but at a much lower price

Recommended to run on 3S lipos if you’re new, 4S lipos if you want a bit more speed!
We’ve created the BBB Beetle ESC, with 2 & 4 wheel drive setup of this motor in mind.

3D model of the motor by THE Tom Brewster: step, stl. Thanks Tom xox
Fusion 360 model of the motor: f3d by Felix Townsend, cheers boi x

We recommend face mounting the motors with our nylon mounts and a 22mm hole in some HDPE.
Example robot, mounting, wiring diagram & battle hardening tips below!

23 in stock

Category: Tags: , , , , ,
Size

63x22x22mm
14x4mm Output Shaft
49mm gearbox & motor length

Weight

~61g

RPM

No load: ~890rpm at 12V
Rated load: ~750rpm at 12V

Input Voltage

12V motor, suited for 3-4S lipo

Current

No load: 0.3A at 12V
Stall: 4.3A at 12V

Example Robot: Bop! by Craig Croucher

Craig built this adorable four wheel drive hammer robot called Bop! – He uses four of our 22mm motors for drive on a BBB Dual Brushed ESC on 4S. Check out his build diary on the forum.

Version 1 vs Version 2

September 2021 we switched to a v2 gearmotor with aluminium gearbox casing, which 9g lighter than v1! Don’t combine v2 & v1 motors in a bot as they’ll be slightly different speeds.

Example mounting

from Igor (J-LGames)Use a 22mm forstner bit to cut a hole in 10mm HDPE or similar for the motor to sit in.
Attach faceplate to outside with woodscrews.

Beetle Wiring Diagram using these motors:

Components in this example: 3S or 4S Lipo, Beetle Safety Kit, Breakout cable, BBB ESCsBBB 22mm MotorsBEC and Flysky Reciever.
Image made by Team DSC.

Battle Hardening

Remove each of the four screws in the gearbox, clean the grease off and reinsert with a small amount of red (high strength) threadlocker. Allow 24hrs to cure. Alternatively some builders like to use adhesive heatshrink over the gearbox and motor.

We also recommend using blue (medium strength) threadlocker on mounting screws when mounting your motors to your chassis. Each time you removed the screws this will need to be cleaned off and reapplied.

9 reviews for BBB Beetleweight Planetary 22mm Gearmotor v2

  1. drneroli (verified owner)

    A consistent mainstay for beetles for a reason. Plenty of power in an easy to mount, easy to solder, simple to maintain package. Only had one jam up after an almost direct hit from a spinner and not long after I managed to free up the motor just from running the spindle back and forth repeatedly, and the gearbox was completely happy and healthy.

    I run 4 of these in ONEIL running at 4S and even with the machine’s tiny wheels I get more than enough speed and shove to see me through some tough fights. Highly recommended.

  2. Stuart (verified owner)

    Performance and value can’t be beat. I’ve run 4 x at 4s and speed and pushing power was brilliant, ever on foam tires. They are also rock solid.

  3. Tom Farkas (verified owner)

    I used these in ‘First Drink of the Day’ at Norwalk in May and they did great! The only damage they took is when my whole bot blew up. Plenty of pushing power, ran at 3s and never got super hot, and easy to set up as a new builder. The folks at BBB are always quick to reply to emails and offer helpful advice. I will continue to use and recommend all of their products!

  4. Thyrus (verified owner)

    Had a 10 minute non stop fun fight with those and they didn’t break a sweat.
    One of the best investments I did.

  5. Thomas W (verified owner)

    Tried these out a 7 months ago in dragon and they have been super reliable and even at 4s for multiple events and only having 1 motor get damaged beyond repair is very impressive. Definitely worth the price I highly recommend people given them a try

  6. morgan (verified owner)

    Reviewing v1:
    ran a fair number of these only ever been able to break one and that was my fault not the motor (running a 2kg bot with the motor basically being stalled for 2 minutes solid) cant recommend them enough for beetles. seem solid to me

  7. Jon-Luke Buckley (Igor) (verified owner)

    Reviewing v1:
    I upgraded Igor to use these motors, and am absolutely thrilled with the increase in power and speed. Would recommend these to any beetle builder.

  8. RIP-Ed

    Reviewing v1:
    Went from having a motor failing in most fights to not a single failure in two events when I switched from 25mm to these motors. Good power and speed too

  9. Tom Brewster

    Reviewing v1:
    I use a pair of these in Drizzle – if they can survive 3 minutes of bouncing around like a Tigger, they’ll survive anything. 12/10 would order again 🙂

Add a review

Your email address will not be published. Required fields are marked *